The MA20 torque transducer is used to measure static and dynamic torque in non-rotating mode.
— operating on strain gauge principle;
— flange mounting;
— static and dynamic (rapidly changing) torque measurement with correct polarity in non-rotating mode;
— PC connection via COM-, USB- Ethernet-ports;
— MS-Windows compatible software in the scope of supply.
± 0.1 Nm; ± 0.2 Nm; ± 0.5 Nm; ± 1 Nm; ± 1.2 Nm; ± 1.5 Nm; ± 2 Nm;
± 3 Nm; ± 5 Nm; ± 6 Nm; ± 8 Nm; ± 10 Nm; ± 12 Nm; ± 15 Nm; ± 20 Nm; ± 30 Nm; ± 50 Nm;
± 60 Nm; ± 80 Nm; ± 100 Nm; ± 120 Nm; ± 150 Nm; ± 200 Nm; ± 250 Nm; ± 300 Nm; ± 400 Nm;
± 500 Nm; ± 600 Nm; ± 800 Nm; ± 1 kNm; ± 1.2 kNm; ± 1.5 kNm; ± 2 kNm; ± 2.5 kNm; ± 3 kNm;
± 5 kNm; ± 6 kNm; ± 8 kNm; ± 10 kNm; ± 12 kNm; ± 15 kNm; ± 20 kNm; ± 25 kNm; ± 30 kNm;
± 40 kNm; ± 50 kNm; ± 60 kNm; ± 80 kNm; ± 100 kNm; ± 120 kNm; ± 150 kNm; ± 200 kNm; ± 250 kNm; ± 300 kNm; ± 400 kNm; ± 450 kNm; ± 500 kNm
0.1
Nominal temperature range0… +60 °C
Nominal supply voltage12... 30V
Power consumption<5W
InterfaceUSB2.0; USB-VCOM (Virtual COM-port; USB-CDC); RS485; RS232; CAN; Ethernet
Sample rate5.0 kSample
Digitizing16 bit
Nominal output voltage or current± 5 V; ± 10 V; 4 … 20 mA
Measurement frequency range0 ... 1 000 Hz (- 1.5 dB)
Frequency output10 kHz ± 5 kHz; 60 kHz ± 30 kHz
TILKOM can develop special accessories and software according to our customers' technical requirements.