The M40H Torque Transducers measure constant and variable torque, speed and mechanical power on rotating and stationary shafts.
— operating on the strain gauge principle;
— measuring static and dynamic torque in any direction (clockwise, counterclockwise);
— MS-Windows compatible software in the scope of supply;
— PC connection via COM-, USB-, Ethernet-ports;
— built-in speed measurement system;
— through hole Ø 100 mm along the spin axis;
— flange mounting;
— no bearings, no slip-rings construction.
±3 kNm; ±5 kNm; ±6 kNm
Nominal speed range4000 rpm
Accuracy class0.1
Nominal temperature range0… +60 °C
InterfaceUSB2.0; USB-VCOM (Virtual COM-port; USB-CDC); RS485; RS232; CAN; Ethernet
Nominal supply voltage12 ... 30 V (DC)
Power consumption< 5 W
Sample rate5.0 kSample
Digitizing16 bit
Nominal output signal or current± 5 V; ± 10 V; 4… 20 mA
Measurement frequency range0 … 1 000 (- 1.5 dB) Hz
Frequency output10 kHz ± 5 kHz; 60 kHz ± 30kHz
TILKOM can develop special accessories and software according to our customers' technical requirements.