+375 17 392 11 83;  +375 29 664 49 66;

 info@tilkom.com;  tilkom1@mail.ru;

MENU
+375 17 284 11 83; +375 29 664 49 66 info@tilkom.com; tilkom1@mail.ru
    Production / Transducers / Force Transducers / 
  1. CT5 Force Transducer

CT5 Force Transducer

CT5 Force Transducer

The digital compressive force transducers of the CT5 series can be used in different fields of the engineering and industry. The CT5 force transducers have both the digital interface (RS232, RS485, USB 2.0) and the analogue interface (0 ...5 V, 0 ...10 V, 4 … 20 mA). The CT5 can be connected to a PC, a microcontroller or a computer network directly.

 — operating on the strain gauge principle;

 — compressive force transducers;

 — PC connection via COM-, USB-, Ethernet-ports;

 — MS-Windows compatible software in the scope of supply.

Nominal loads:

100 kN; 250 kN; 400 kN; 600 kN; 1000 kN

 Accuracy class

0.2

 Protection class

IP65

 Interface

USB2.0; USB-VCOM (Virtual COM-port; USB-CDC); RS485; RS232; CAN; Ethernet

 Sample rate

5.0 kSample

 Digitizing

13 bit

 Nominal output voltage or current

±5 V; ±10 V; 4… 20 mA

 Measurement frequency range

0 … 1 000 (- 1.5 dB) Hz

 Frequency output

10 kHz ± 5 kHz; 60 kHz ± 30 kHz

 Power consumption

<5 W

 Nominal temperature range

0… +60 °C

 Loads in t

10 t; 25 t; 40 t; 60 t; 100 t
CT5 Data Sheet download

Accessories

Signal cable
Signal cable

The signal cable is used to connect torque and force transducers with decoders and display units. Standard length - 5m (optionally up to 200m).

AC-power adapter
AC-power adapter

The AC adapter with a connector for transducer power supply
Decoder
Decoder

The decoder converts the digital transducer code into the desired interface or output signal (analogue, digital or frequency).

T41 Display Unit
T41 Display Unit

The T40 display unit is used to indicate torque, force, rotation speed and power, type and ID of transducers. Plastic housing.
T50 Display Unit
T50 Display Unit

The T50 display unit has an oversized LED panel and can be used for data controlling from a distance up to 70m .

T40 Display Unit
T40 Display Unit

The T40 display unit is used to indicate torque, force, rotation speed and power, type and ID of transducers. Metal housing.

T42 Display Unit
T42 Display Unit

The T42 display unit is used to indicate a torque, force, rotation speed and power, type and ID of transducers. Metal housing.

TILKOM can develop special accessories and software according to our customers' technical requirements.