+375 17 392 11 83;  +375 29 664 49 66;

 info@tilkom.com;  tilkom1@mail.ru;

MENU
+375 17 284 11 83; +375 29 664 49 66 info@tilkom.com; tilkom1@mail.ru
    Production / Transducers / Force Transducers / 
  1. CT2 Force Transducer

CT2 Force Transducer

CT2 Force Transducer

The CT2 digital force transducers measure static and dynamic forces in various industrial and engineering applications. The CT2 force transducers can have digital (RS232/485, USB 2.0 or Ethernet interfaces) and analogue (5 V, 10 V, 4 ... 20 mA) outputs. Transducers can be connected to a PC, microcontroller or to a computer network directly. The appropriate software is in the scope of supply.

 — operating on the strain gauge principle;

 — PC connection via COM-, USB-, Ethernet-ports;

 — MS-Windows compatible software in the scope of supply.

Nominal loads:

2 kN; 5 kN; 10 kN; 20 kN; 30 kN; 50 kN

 Accuracy class

0.2

 Protection class

IP65

 Interface

USB2.0; USB-VCOM (Virtual COM-port; USB-CDC); RS485; RS232; CAN; Ethernet

 Sample rate

5.0 kSample

 Digitizing

13 bit

 Nominal output voltage or current

±5 V; ±10 V; 4… 20 mA

 Measurement frequency range

0 … 1 000 (- 1.5 dB) Hz

 Frequency output

10 kHz ± 5 kHz; 60 kHz ± 30 kHz

 Power consumption

<5 W

 Nominal temperature range

0… +60 °C

 Loads in t

10 t; 25 t; 40 t; 60 t; 100 t
CT2 Data Sheet download

Accessories

Signal cable
Signal cable

The signal cable is used to connect torque and force transducers with decoders and display units. Standard length - 5m (optionally up to 200m).

AC-power adapter
AC-power adapter

The AC adapter with a connector for transducer power supply
Decoder
Decoder

The decoder converts the digital transducer code into the desired interface or output signal (analogue, digital or frequency).

T41 Display Unit
T41 Display Unit

The T40 display unit is used to indicate torque, force, rotation speed and power, type and ID of transducers. Plastic housing.
T50 Display Unit
T50 Display Unit

The T50 display unit has an oversized LED panel and can be used for data controlling from a distance up to 70m .

T40 Display Unit
T40 Display Unit

The T40 display unit is used to indicate torque, force, rotation speed and power, type and ID of transducers. Metal housing.

TILKOM can develop special accessories and software according to our customers' technical requirements.