The MA20H torque transducers are used to measure static and dynamic torque in a non-turning mode.
— operating on the strain gauge principle;
— flange mounting;
— measuring of static and dynamic (rapidly changing) torque with correct polarity in a non-turning mode;
— PC connection via COM-, USB-, Ethernet-ports;
— MS-Windows compatible software in the scope of supply;
— 44 mm bore along the axis of rotation.
± 500 Nm; ± 600 Nm; ± 800 Nm; ± 1 kNm;Accuracy class
0.1Nominal temperature range
0… +60 °CNominal supply voltage
12... 30 VPower consumption
USB 2.0; RS485; RS232; EthernetSample rate
13 bitNominal output voltage or current
± 5 V; ± 10 V; 4 … 20 mAMeasurement frequency range
0 ... 1 000 Hz (- 1.5 dB)Frequency output
10 kHz ± 5 kHz; 60 kHz ± 30 kHz
Signal cable is used to connect torque and force transducers with decoders and display units. Standard length - 5 m. (optionally up to 200 m).
The decoder converts the digital transducer code into the desired by a customer interface or output signal (analogue, digital, frequency).
The T40 display unit is used to indicate torque, force, rotation speed and power, type and ID of transducers. Plastic housing
The T50 display unit has the oversize LED panel and can be used for data controlling from a distance up to 70 m .
The T40 display unit is used to indicate torque, force, rotation speed and power, type and ID of transducers. Metal housing.
TILKOM can develop special accessories and software according to our customers' technical requirements.