+375 17 392 11 83;  +375 29 664 49 66;

 info@tilkom.com;  tilkom1@mail.ru;

MENU
+375 17 284 11 83; +375 29 664 49 66 info@tilkom.com; tilkom1@mail.ru
    Production / Telemetry / 
  1. TT10 Telemetry

TT10 Telemetry

TT10 Telemetry

The digital telemetry TT10 is designed for amplifying, digital conversion and contactless transmission of signals from the strain gauges (thermocouples) mounted on the rotating machine parts by the end shaft applications.

Inductive power supply

3-step sensitivity adjustment

Outputs: digital (USB 2.0, RS232, RS485 (MODBUS protocol), Ethernet), analogue (± 5 V, ± 10 V, 4 ... 20 mA), frequency (10 ± 5 kHz, 60 ± 30 kHz)

Direct PC connection 

Built-in speed measuring system

Hollow shaft rotor for laying wires to the place of their soldering

Number of measuring channels

1

 Permissible strain gauge full bridge resistance

100 … 1000 Ω  (optionally thermocouple ХА)

 Nominal input signal

± 0.5 mV/V; ± 1 mV/V; ± 2 mV/V

 Characteristic tolerance

±0.5 %

 Max. rotation speed

6000 rpm
TT10 Data Sheet download

Accessories

Signal cable
Signal cable

The signal cable is used to connect torque and force transducers with decoders and display units. Standard length - 5m (optionally up to 200m).

AC-power adapter
AC-power adapter

The AC adapter with a connector for transducer power supply
Decoder
Decoder

The decoder converts the digital transducer code into the desired interface or output signal (analogue, digital or frequency).

TILKOM can develop special accessories and software according to our customers' technical requirements.